Nilfisk-Advance PS 333A Operating Instructions Manual

13may damage the floor. Depending on the flooring andtype of dirt you might have to check and clean thebrush or pad during scrubbing/polishing. Unpluggthe machine, demount the pad or brush and rinse it inwarm water. Both sides can be used on the pad. Use thetransportation wheels when moving the machine whenit is not running.Caution! Do not run over the lead; it is a good ideato carry the lead over your shoulder to protect it andprevent accidents.After operation. Unplugg the machine.. Clean the solution tank. Place the solution hose in adrain and rinse the tank while the fluid valve is keptopen. Keep the valve open and rinse until the tank isclean. If there is no drain avaliable, dismount the tankand clean it in a suitable place.. Dismount the padholder or brush. Never leave thepadholder or brush mounted on the machine. It maydestroy the brush/padholder.. Clean the brush or pad and the padholder.. Wipe the lead as you are coiling it. Use the hook (pos.4on picture 1) and the handle to coil the mains lead.Always coil from the machine to the plug, this is toprevent the lead fromgetting entangle.AccessoriesBrushes and padsBrushesScrubbing brush Plastic,linoleumPolish/schampoo Polishing/carpetschampooingSteel brush Concrete floor a.s.oPadsWhite PolishingRed Lightly soiled floorsBlue Heavily soiled floorsBrown Polish removal