Nilfisk-Advance SD 130 Instructions For Use Manual

Contents

FORM NO. 56041529 - SD 130 - 8TROUBLESHOOTINGSWIRLS ON THE FLOOR AFTER SCRUBBING• Floor not clean.• Incorrect solution.• Area not properly swept - debris in pad or brush.• Improper pad or brush for the job.• Moving the machine too fast.SWIRLS ON THE FLOOR AFTER DRY BUFF-ING• Moving the machine too fast.• Floor finish too soft.• Area not properly swept - debris in pad or brush.• Improper pad or brush for the job.CIRCLES ON THE FLOOR• Machine standing still while the brush or pad is running.FLOOR FINISH REMOVED• Improper pad... too aggressive.• Solution too strong.MACHINE WOBBLES DURING OPERATION• Defective pad... one side is more dense than the other.• Machine left sitting on brush or pad for extended period of time causingbristles or pad to “take a set”.• Pad not “seated” properly into pad holder bristles.• Warped block on brush or padholder - replace.MACHINE DOES NOT RUN• Check plug for proper connection - on machine and at wall outlet.• Check building circuit breaker.• Call for service.TECHNICAL SPECIFICATIONS (as installed and tested on the unit)Model SD 130Model Number 56201625Motor .50 hpTransmission Dual-PlanetaryPad/Brush Speed 175 rpmPad/Brush Size 13” (33 cm)Wheels 5” (13 cm)Cord Length 50’ (15 m)Base Width 13.5” (34.29 cm)Height w/Handle 48” (123 cm)Net Weight (w/pad holder) 67lbs (30kg)

/ 13

Related manuals for Nilfisk-Advance SD 130