Nilfisk-Advance SWEEPER SW 700S P User Manual

Also see for SW 700S P: Technical specification

Contents

Nilfisk-Advance SWEEPER SW 700S P User Manual Manual pdf 45 page image

USER MANUAL ENGLISHSW 700S P 146 0676 000(5)2007-06 A 3SPARE PARTS AND MAINTENANCEAll necessary operating, maintenance and repair procedures must be carried out by qualified personnel or by Nilfisk-AdvanceService Centers. Only original spare parts and accessories must be used.Contact Nilfisk-Advance for service or to order spare parts and accessories, specifying the machine model and serial number.CHANGES AND IMPROVEMENTSNilfisk-Advance constantly improves its products and reserves the right to make changes and improvements at its discretion withoutbeing obliged to apply such benefits to the machines that were previously sold.Any change and/or addition of accessories must be approved and performed by Nilfisk-Advance.OPERATION CAPABILITIESThis sweeper has been designed and built to clean/sweep smooth and solid floors, and to collect dust and light debris, in civil andindustrial environments, under safe operation conditions by a qualified operator.CONVENTIONSForward, backward, front, rear, left or right are intended with reference to the operator’s position, that is to say with the hands on thehandlebar (3).UNPACKING/DELIVERYTo unpack the machine carefully follow the instructions on the packing.Upon delivery check that the packing and the machine were not damaged during transportation. In case of visible damages, keepthe packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage claim.Check that the machine is equipped with the following features:Sweeper User ManualPetrol Engine ManualSweeper Spare Parts ListSAFETYThe following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessaryprecautions to safeguard people and property.The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the totalcooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while workingor moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator isthe best guarantee against accidents and is essential for successful completion of any prevention program.SYMBOLSDANGER!It indicates a dangerous situation with risk of death for the operator.WARNING!It indicates a potential risk of injury for people or damage to objects.CAUTION!It indicates a caution or a remark related to important or useful functions. Pay careful attention to theparagraphs marked by this symbol.NOTEIt indicates a remark related to important or useful functions.CONSULTATIONIt indicates the necessity to refer to the User Manual before performing any procedure.–––