Nilfisk-Advance Scrubtec 334 Instructions For Use Manual

Also see for SC250: Service manual Instructions for use Instructions for use

Contents

Nilfisk-Advance Scrubtec 334 Instructions For Use Manual Manual pdf 9 page image

INSTRUCTIONS FOR USE ENGLISH9100001614 - SC250, Scrubtec 334 907/2016PARK PEDALNOTEIn order to facilitate the use of the park pedal (10),slightly lift the front section of the machine by gainingleverage with your hands on the handlebar (A, Fig.1).For parking/handling:1. Putting your hands on the handlebar (A), slightly lift thefront section of the machine, then press the pedal (B, Fig.1).In this condition, the front wheels (11) are resting on theÀRRUDQGWKHEUXVKVTXHHJHHXQLWLVOLIWHGFor washing/drying:2. Putting your hands on the handlebar (A), slightly lift thefront section of the machine, then lift the pedal (C).In this conditions, the front wheels (11) are retracted andWKHEUXVKVTXHHJHHXQLWLVUHVWLQJRQWKHÀRRUSOLUTION TANK FILLINGCAUTION!8VHRQO\ORZIRDPDQGQRQÀDPPDEOHdetergents, intended for automatic scrubberapplications.WARNING!:KHQXVLQJÀRRUFOHDQLQJGHWHUJHQWVIROORZthe instructions on the labels of the detergentbottles.7RKDQGOHÀRRUFOHDQLQJGHWHUJHQWVZHDUsuitable gloves and protections.1. Remove the tank cover (12).2. Remove the cap (A, Fig. 2) on the solution tank (B).3. Fill the solution tank (B) with water, leaving a fewcentimetres from the top.The water temperature must not exceed 40 °C.4. Use the measurement mark on the cap (A) to mix thesolution.The capacity to the mark is 30 ml, equivalent to a 0.5 %solution when diluted in a full tank of water. Always followthe dilution instructions on the label of the chemical productused to prepare the solution.5. Replace the cap (A) on the solution tank.6. Replace the tank cover (12).NOTEWhenever the 2 LEDs on the solution push-button (3)ÀDVKVWRSWKHPDFKLQHDQG¿OOWKHVROXWLRQWDQNBACFigure 1P100932ABFigure 2P100933