3二.产品介绍Charger statusTo be chargedChargingFull chargeCharging errorCharger indicator statusOffSolid onSlow flashQuick flash3. Main parts model and specification:4. WIFI camera’s specifications and parameters:Ⅲ. Operation Manual1.Charging the Li-po battery:Transmitter:NE-TXOS216-D,2.4GHz 4CHReceiver:NE-MASF15Charger: NE-CH1020M USB ChargerMotor:8520 DC motorBattery:3.7V 700mAh Li-po batteryMemory: Accepts up to 32G Micro SD cardCamera Size: 45mm L x 25mm W x 8mm HCodec Video: Motion JPEG, 1280X720, 30fps, file extension . flvCodec Audio: MonoStill Image Capture: 1280 x 720, 96 dpi, file extension .jpgWIFI Control Distance: About 100 meters (No Interference and No obstacles)Warning!! The charger contains protective circuitry. If you experience any difficulties whilecharging the battery, please disconnect the battery from the charger and unplug the charger from thepower source. Allow the battery and the charger to rest for two hours as this will allow the chargerprotection circuit to rest. If this issue re-occurs during normal use, please contact technical supportfor further assistance.1) Plug the USB charger into your USB port.2) Plug the Li-po battery into the USB charger. The power indicator light on the charger turns to solidon. It means charging. Once charging is finished, the power indicator light will flash slowly. Pleasepull them out.Below table shows different status in charging.NE-MASF 15 2.4GHZ 4CH Quadcopter