06 076 First Ride1 Install App and register/login. P ower ON the miniPRO. The Bluetooth iconblinking indicates the miniPRO is waiting fora connection.23 Click “Search device” to connect to your miniPRO.The miniPRO will beep when the connection issuccessful. The Bluetooth icon will stop blinkingand remain illuminated.Follow the App instructions to learn how to ridesafely. Have fun!There are safety risks when learning to ride the miniPRO. You must read the SafetyInstructions and follow the New Rider Tutorial in the Ninebot by Segway App before your firstride. Go to www.segway.com to watch the safety video.Use your mobile device (Android or iOS) to install the Ninebot by Segway App, read the SafetyInstructions, then follow the New Rider Tutorial before your first ride. Go to the Apple App Store(iOS) or the Google Play Store (Android) and search for "Ninebot" to download and install theApp.Scan to download the App iOS 7.0 or above, Android 4.3 or aboveWhen your miniPRO intermittently sounds an alarm, stop riding and check the App for details.8 Learning to RideAfter activation, the App will lead you through the New RiderTutorial. Please follow the instructions in the App and in thismanual.NOTEYou must first download the Ninebot by Segway App on yourmobile device. The App will lead you through the New RiderTutorial.For your safety, the miniPRO will limit the max speed to 7 km/huntil you complete the New Rider Tutorial. For the first 1 km aftercompleting the New Rider Tutorial, the max speed will be limitedto 10 km/h, after which you can disable the speed limiter via theApp and reach a maximum speed of 16 km/h.Wear an approved helmet and otherprotective gear to minimize anypossible injury.7 ChargingChargeportLift up thecoverOpen therubber capInsert the pluginto the socketDo not connect the charger if the charge port or charge cable is wet.Your miniPRO is fully charged when the LED on the chargerchanges from red (charging) to green (trickle charge).WARNINGRider must weigh 40–100 kg and mustbe 130–200 cm tall.AndroidiOS