Ninja BL492 Instructions Manual

Also see for BL492 series: Owner's guide

Contents

14www.ninjakitchen.comEnglishWARNING: Handle the Pro Extractor Blades™ Assembly with care, as the blades are sharp.WARNING: Never leave the appliance unattended while in use.WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja Cup to bedamaged or to shatter, which may cause personal injury.CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of theuser being burned.CAUTION: Remove the Pro Extractor Blades Assembly from the Nutri Ninja Cup upon completion ofblending. Do not store ingredients before or after blending them in the cup with the blade assemblyattached. Some foods may contain active ingredients or release gases that will expand if left in a sealedcontainer, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage inthe cup, only use Sip & Seal™ Lid to cover.IMPORTANT: Make sure that the motor base is plugged in for use.1 Review warning and caution statements above beforeproceeding to number 2.2 Place the motor base on a clean, dry, level surface suchas a counter or table top. Press down on the motorbase to make sure that the suction cups adhere to thecounter or table top.3 Add ingredients to the Nutri Ninja Cup.4 Place the Pro Extractor Blades™ onto the selected cupand tightly screw it on clockwise until you have a goodseal. (Fig. 1)5 Turn the selected cup upside down and place it onto themotor base, aligning the tabs on the cup with the motorbase. Rotate the cup clockwise until it locks in place,you will hear a click when the lock is engaged. (Fig. 2)6 Once the cup is engaged, the programs available forthat attachment will illuminate. (Fig. 3) The Auto-iQ™program will stop the appliance automatically at the endof the program.7 To pause the appliance, press the selected speed orAuto-iQ program a second time.Fig. 1 Fig. 2Assembly and Use of the Nutri Ninja™ CupsFig. 3 Fig. 4 Fig. 6ASSEMBLY USE REMOVAL8 Once you have reached your desired consistency,press the START/STOP button to turn the program off.Turn the cup counter-clockwise and pull straight up toremove. (Fig. 4, Fig. 5)9 Turn the cup upright and remove the Pro ExtractorBlades by twisting the Pro Extractor Blades counter-clockwise. (Fig. 6)10 Do not store blended contents with the Pro ExtractorBlades Assembly attached.11 Place the Sip & Seal™ lid onto the Nutri Ninja Cup, twistto seal and enjoy!12 For storage, only use Sip & Seal lid to cover.13 Be sure to store the Pro Extractor Blades Assemblyattached to an empty cup when not in use.14 Make sure that the motor base is unplugged when notin use.15 To release the motor base fromthe counter or table top, place yourhands underneath both sides of themotor base and gently pull the unitup and towards you.Fig. 5