Ninja BL642W Owner's Manual

Also see for BL642W: Owner's guide

Contents

17 18www.ninjakitchen.com1-877-646- 5288USING THE CHOPPING BLADE ASSEMBLY1 Review warning and caution statements on page 16before proceeding to number 2.2 Place the motor base on a clean, dry, level surface suchas a counter or table top. Press down on the motorbase to make sure that the suction cups adhere to thecounter or table top.3 Secure the bowl onto the motor base.4 Holding the Chopping Blade Assembly by the shaft,place it onto the gear shaft inside the bowl. Ensure thatthe Chopping Blade Assembly fits around the gear shaftand that it is standing straight. (Fig. 1)5 Add the ingredients and secure the bowl lid onto thebowl.6 Plug the power cord into the electrical outlet and presson the power button ( ). Select the speed or Auto-iQ™program that best suits your needs. Pulse ingredientsfor even chopping by holding the Auto-iQ Pulse buttonuntil your desired consistency is reached.NOTE: Please refer to “Speed Settings & Uses” chartfor suggested uses and speeds.7 When you have reached your desired consistency, stopthe appliance by pressing the power button ( ) andwait for the blade to stop turning. (Fig. 2)8 To remove the lid, press the release button on the lidand pull the lid handle up to a 90° angle. (Fig. 2)9 Turn the bowl counter-clockwise and lift it to remove itfrom the motor base. (Fig. 3)10 To release the motor base from the counter or table top,place your hands underneath both sides of the motorbase and gently pull the unit up and towards you.(Fig. 4)USING THE DOUGH BLADE ASSEMBLY1 Review warning and caution statements on page 16before proceeding to number 2.2 Place the motor base on a clean, dry, level surface suchas a counter or table top. Press down on the motorbase to make sure that the suction cups adhere to thecounter or table top.3 Secure the bowl onto the motor base.4 Holding the Dough Blade Assembly by the shaft, placeit onto the gear shaft inside the bowl. Ensure that theDough Blade Assembly fits around the gear shaft andthat it is standing straight. (Fig. 5)5 Add the ingredients and secure the bowl lid onto thebowl.6 Plug the power cord into the electrical outlet and presson the power button ( ). Select the LOW/DOUGHbutton and process until ingredients come together toform a mass.NOTE: Please refer to “Speed Settings & Uses” chartfor suggested uses and speeds.7 Once finished making dough, stop the appliance bypressing the power button ( ) and wait for the blade tostop turning.8 To remove the lid, press the release button on the lidand pull the lid handle up to a 90° angle. (Fig. 2)9 Turn the bowl counter-clockwise and lift it to remove itfrom the motor base. (Fig. 3)10 To release the motor base from the counter or table top,place your hands underneath both sides of the motorbase and gently pull the unit up and towards you.(Fig. 4)Fig. 2 Fig. 3 Fig. 5Fig. 1IMPORTANT: Use only the LOW/DOUGH settingwhen using either disc.NOTE: The feed chute lid features a two part pusherto guide food through the chute. Use the full pusherfor larger items such as cucumbers. Twist and pull toremove the smaller pusher and use the narrow chutefor smaller items such as carrots.NOTE: The Slicing/Shredding Disc is reversible. Use theside labeled “Slicer” for Slicing. Carefully flip the discover to the side labeled “Shredder” for shredding.1 Review warning statements at the top beforeproceeding to number 2.2 Place the motor base on a clean, dry, level surface suchas a counter or table top. Press down on the motorbase to make sure that the suction cups adhere to thecounter or table top.(Fig. 6)3 Secure the bowl onto the motor base.4 Place the spindle inside the bowl.5 Use the finger holes to grasp the selected disc andplace it over the spindle.6 Place the feed chute lid on the bowl and turn clockwiseuntil you hear a click indicating the lid is locked inplace. (Fig. 6)7 Plug the power cord into the electrical outlet and pressup on the power toggle ( ) to turn the power “On”.8 Select LOW/DOUGH on the control panel. The discs willbegin spinning.9 Add the food that you want to slice, shred or gratethrough the feed chute on the lid. (Fig. 6) Use thetwo-part food pusher to help guide the food throughthe feed chute. The middle piece of the food pusher isremovable to use for smaller ingredients.10 When finished,stop the appliance by pressing the powerbutton ( ) and wait for the disc to stop turning. Pressthe button on the feed chute lid located near the handleto unlock and turn the lid counter-clockwise. Lift toremove from the processor bowl. Using the finger holes,carefully lift the disc out of the bowl and remove thespindle.11 To release the motor base from the counter or table top,place your hands underneath both sides of the motorbase and gently pull the unit up and towards you.(Fig. 4)Fig. 6Assembly and Use of the Cutting DiscsFig. 4Assembly and Use of the Processor Bowl - cont.REMOVALUSECHOPPING BLADEASSEMBLYUSEDOUGH BLADEASSEMBLYWARNING: The Cutting Discs are sharp. Always use the finger holes when placing or removing the cuttingdiscs. Failure to do so will result in a risk of laceration.WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or toshatter, which may cause personal injury.WARNING: Never leave the appliance unattended while in use.IMPORTANT: Make sure that the motor base is plugged in for use.

/ 13

Related manuals for Ninja BL642W