Ninja BL642W Owner's Manual

Also see for BL642W: Owner's guide

Contents

15 16www.ninjakitchen.com1-877-646- 5288Available AccessoriesWARNING: Handle the Blade Assemblies andDiscs with care when washing, as the bladesare sharp. When handling the blade assemblies,always hold by the shaft. When handling thegrating, slicing/shredding discs, use the fingerholes to hold.1 Remove all packaging material and labels from theaccessories.2 Wash the lids, food processor bowl, mini prep bowl,discs, and blade assemblies in warm, soapy water.When washing the blade assemblies or the discs, use adish-washing utensil with a handle to avoid direct handcontact with blades.3 Handle blade assemblies and disc with care to avoidcontact with sharp edges. Rinse and air dry thoroughly.4 The food processor bowl, mini prep bowl, disc, lidsand blade assemblies are all dishwasher safe. It isrecommended that the lids and blade/disc assembliesbe placed on the top rack. Ensure that the blades/discsare removed from the containers before placing in thedishwasher.5 Wipe the motor base clean with a damp cloth.ghijfFROZEN DRINKSSMOOTHIESFOODPUREENutriNinjaNutriNinjaPULSEHIGHMEDONOFF1500WATTSLOWAUTOAUTOAUTOA UTO BLENDA UTO BLASTFROZEN DRINKSSMOOTHIESFOODPUREENutriNinjaNutriNinjaPULSEHIGHMEDONOFF1500WATTSLOWAUTOAUTOAUTOA UTO BLENDA UTO BLASTFROZEN DRINKSSMOOTHIESFOODPUREENutriNinjaNutriNinjaPULSEHIGHMEDONOFF1500WATTSLOWAUTOAUTOAUTOAUTO BLENDA UTO BLASTKSSNutriNinjaNutriNinjaPULSEHIGHMEDONOFF1500WATTSAUTOAUTO BLENDA UTO BLASTFROZEN DRINKSSMOOTHIESFOODPUREENutriNinjaNutriNinjaPULSEHIGHMEDONOFF1500WATTSLOWAUTOAUTOAUTOAUTO BLENDA UTO BLASTFROZEN DRINKSSMOOTHIESFOODPUREENutriNinjaNutriNinjaPULSEHIGHMEDONOFF1500WATTSLOWAUTOAUTOAUTOAUTO BLENDA UTO BLASTFROZEN DRINKSSMOOTHIESFOODPUREENutriNinjaNutriNinjaPULSEHIGHMEDONOFF1500WATTSLOWAUTOAUTOAUTOAUTO BLENDA UTO BLASTFROZEN DRINKSSMOOTHIESFOODPUREENutriNinjaNutriNinjaPULSEHIGHMEDONOFF1500WATTSLOWAUTOAUTOAUTOAUTO BLENDA UTO BLASTFROZEN DRINKSSMOOTHIESFOODPUREENutriNinjaNutriNinjaPULSEHIGHMEDONOFF1500WATTSLOWAUTOAUTOAUTOAUTO BLENDA UTO BLASTeAssembly and Use of the Processor BowlNOTE: Nutri Ninja® | Ninja® Blender with Auto-iQ™Technology can sense which jar is on the motor base.The available function lights will illuminate dependingon which jar is placed on the motor base. (Fig. 1)1 Review warning and caution statements above beforeproceeding to number 2.2 Place the motor base on a clean, dry, level surface such as acounter or table top. Press down on the motor base to makesure that the suction cups adhere to the counter or table top.3 Holding the desired blade assembly by the top of theshaft, place it onto the drive gear inside the bowl.Ensure that the blade assembly is seated properly andis standing upright. (Fig. 2)NOTE: The blade will fit loosely on the drive gear.3 Align and lower the Processor Bowl onto the motorbase. (Fig. 3) Handle should be aligned slightly to theright of the “LOCK” symbol on the motor base.4 Rotate the bowl clockwise until it locks in place, you willhear a click when the lock is engaged. (Fig. 4)5 The bowl can be placed on the motor base two ways;the handle can be on the front right corner or the frontleft corner. (Fig. 5a, Fig. 5b)6 Add the ingredients to the bowl, making sure that theydo not exceed the highest measured marking line onthe side of the bowl.7 Holding the lid by the handle in the upright position,place it on top of the Processor Bowl aligning thetriangle ( ) located on the lid with the triangle ( )located on the Processor Bowl handle. (Fig. 6a) Pressthe handle down until you hear a click. The triangles onthe lid and the Processor Bowl handle MUST be alignedin order for the blender to turn on. (Fig. 6b)NOTE: The 64 oz. bowl is not intended for blendingdrinks. Do not overfill.8 Plug the power cord into the electrical outlet and pressthe power button ( ).NOTE: As a safety feature, the power button ( ) willflash and the motor will not work if the bowl and lidare not installed correctly. When the bowl and lidare installed properly, the power button ( ) will besolid, indicating that the appliance is ready for use.ASSEMBLYFROZEN DRINKSSMOOTHIESPUREEPULSEHIGHMEDLOW /DOUGHAUTOAUTOAUTOFROZEN DRINKSSMOOTHIESPUREEPULSEHIGHMEDLOW /DOUGHAUTOAUTOAUTOFROZEN DRINKSSMOOTHIESPUREEPULSEHIGHMEDLOW /DOUGHAUTOAUTOAUTOFig. 1FROZEN DRINKSSMOOTHIESPUREEPULSEHIGHMEDLOW /DOUGHAUTOAUTOAUTOFig. 6babc de Feed Chute Lidf Slicing/Shredding Discg Grating Disca Food Processor Bowlb Food Processor Lidc Chopping Blade Assemblyd Dough Blade Assemblyh 24 oz. Mini Prep Bowli Spindle for Discs & Mini Prep Bowlj Mini Prep Bowl Blade AssemblyWARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefullyremove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do will result in risk oflaceration.WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or toshatter, which may cause personal injury.WARNING: Never leave the appliance unattended while in use.CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of theuser being burned.CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potentialto expand after blending resulting in excessive pressure buildup that can pose a risk of injury.IMPORTANT: Make sure that the motor base is plugged in for use.Fig. 5 Fig. 6aFig. 2 Fig. 4bFig. 3Fig. 4aOR