Ninja BL682 Owner's Manual

Also see for BL682: Owner's guide

151-877-646-5288Assembly and Use of the Processor Bowl - cont.Fig. 2 Fig. 3 Fig. 5Fig. 1 Fig. 4REMOVALUSECHOPPING BLADEASSEMBLYUSEDOUGH BLADEASSEMBLYUSING THE CHOPPING BLADE ASSEMBLY1 Review warning and caution statements on page 14before proceeding to number 2.2 Place the motor base on a clean, dry, level surface suchas a counter or table top. Press down on the motorbase to make sure that the suction cups adhere to thecounter or table top.3 Secure the bowl onto the motor base.4 Holding the Chopping Blade Assembly by the shaft,place it onto the gear shaft inside the bowl. Ensure thatthe Chopping Blade Assembly fits around the gear shaftand that it is standing straight. (Fig. 1)5 Add the ingredients and secure the bowl lid onto thebowl.6 Plug the power cord into the electrical outlet and presson the power button ( ). Select the speed or Auto-iQ™program that best suits your needs. Pulse ingredientsfor even chopping by holding the Auto-iQ Pulse buttonuntil your desired consistency is reached.NOTE: Please refer to “Speed Settings & Uses” chartfor suggested uses and speeds.7 When you have reached your desired consistency, stopthe appliance by pressing the power button ( ) andwait for the blade to stop turning. (Fig. 2)8 To remove the lid, press the release button on the lidand pull the lid handle up to a 90° angle. (Fig. 2)9 Turn the bowl counter-clockwise and lift it to remove itfrom the motor base. (Fig. 3)10 To release the motor base from the counter or table top,place your hands underneath both sides of the motorbase and gently pull the unit up and towards you.(Fig. 4)USING THE DOUGH BLADE ASSEMBLY1 Review warning and caution statements on page 14before proceeding to number 2.2 Place the motor base on a clean, dry, level surface suchas a counter or table top. Press down on the motorbase to make sure that the suction cups adhere to thecounter or table top.3 Secure the bowl onto the motor base.4 Holding the Dough Blade Assembly by the shaft, placeit onto the gear shaft inside the bowl. Ensure that theDough Blade Assembly fits around the gear shaft andthat it is standing straight. (Fig. 5)5 Add the ingredients and secure the bowl lid onto thebowl.6 Plug the power cord into the electrical outlet and presson the power button ( ). Select the LOW/DOUGHbutton and process until ingredients come together toform a mass.NOTE: Please refer to “Speed Settings & Uses” chartfor suggested uses and speeds.7 Once finished making dough, stop the appliance bypressing the power button ( ) and wait for the blade tostop turning.8 To remove the lid, press the release button on the lidand pull the lid handle up to a 90° angle. (Fig. 2)9 Turn the bowl counter-clockwise and lift it to remove itfrom the motor base. (Fig. 3)10 To release the motor base from the counter or table top,place your hands underneath both sides of the motorbase and gently pull the unit up and towards you.(Fig. 4)