Ninja BL682 Owner's Manual

Also see for BL682: Owner's guide

191-877-646-5288HOW TO CLEANCAUTION: Make sure that the motor base isunplugged from the power source before insertingor removing any blade assembly and beforecleaning.CAUTION: DO NOT immerse the motor base intowater or any other liquid.1 Separate/remove all parts from each other.2 Hand Washing: Wash the lids, pitcher, food processorbowl, Nutri Ninja cup, and blade assemblies in warm,soapy water. When washing the blade assemblies, usea dish-washing utensil with a handle to avoid directhand contact with blades. Handle blade assemblieswith care to avoid contact with sharp edges. Rinse andair dry thoroughly.Dishwasher: The containers, lids, blade assembliesand attachments are all dishwasher safe. The lidsand blade assemblies are top rack dishwasher safe.Ensure that the blade assemblies are removed from thecontainers before placing in the dishwasher.WARNING: Handle the Blade Assemblies withcare when washing, as the blades are sharp.Contact with the blades’ edges can result inlaceration.3 Wipe the motor base clean with a damp cloth.Please call customer service if any servicing needs to beperformed on the appliance at 1-877-646-5288.Care & MaintenanceHOW TO STORE1 Store the Nutri Ninja® | Ninja® Blender System withAuto-iQ™ Technology upright with the blade assemblyinside the corresponding container with the lid securedon top. Do not place anything on top. Store the rest ofthe attachments in a safe place where they will not bedamaged and won’t cause harm. Wrap the power cordaround the cord wrap on the back of the motor base.RESETTING THE MOTOR THERMOSTATThe Nutri Ninja | Ninja Blender System with Auto-iQTechnology features a unique safety system whichprevents damage to the unit’s motor and drive systemshould you inadvertently overload your appliance. Ifthe appliance is being overloaded, the motorwill stop. Allow the appliance to cool forapproximately 15 minutes. To reset the appliance,follow the resetting procedure below:1 Unplug the appliance from the electrical outlet.2 Remove and empty the container and ensure that nofood is jamming the Blade Assembly or attachments.3 Allow the appliance to cool for approximately 15minutes.4 Re-install the container onto the base and re-plug theappliance into the electrical outlet.5 Proceed to use the appliance as before making sure notto exceed the recommended maximum capacities.