Ninja BL700 series Owner's Manual

Also see for BL700 series: Owner's guide Owner's guide

Contents

Ninja BL700 series Owner's Manual Manual pdf 6 page image

10 TOLL FREE: 1-800-798-7398 www.ninjakitchen.com 11LockingHandleFig. 56 Press the power button ( ) or theselected button a second time to stopthe attachment from turning or press adifferent button to change the speed.7 When you have reached your desiredconsistency, stop the appliance bypressing the power button ( ) and waitfor the attachment to stop turning. Thenremove the lid by pressing the releasebutton, lifting the handle up and pullingstraight up. (Fig. 6)CAUTION: Always use a spatula todislodge food that has stuck to the sidesof the pitcher. Never insert your hands inthe pitcher as the blades are sharp.8 To remove the container, press the powerbutton ( ) to turn the appliance Off. Waitfor the attachment to stop moving beforeremoving. (Fig. 7)9 Depending on the consistency of thecontents in the container, open thepouring spout cap and use the spoutto empty liquid contents. For thickerconsistencies, or for removing doughfrom the bowl, remove the lid andattachment carefully (by its shaft), thenempty contents from the container.10 Unplug the appliance after use.3 Place the color co-ordinated lid onto thecorresponding container with the lockinghandle in the upright position and thepouring spout on the corner opposite thecontainer’s handle. Align the arrows ( )located on the lid and container’s handle.Ensure that the lid is completely seatedand press the lid down into the container.Press the locking handle down so thatthe latches on the lid fit under the tabson the container. (Fig. 5)NOTE: If you need to add additionalingredients while the appliance isprocessing, open the pouring spout capand pour the ingredients in through theopening.4 Plug the power cord into the electricaloutlet and press on the power button ( ).NOTE: As a safety feature, the powerbutton ( ) will flash and the motor willnot work if the container and lid are notinstalled correctly. When the containerand lid are installed properly, the powerbutton ( ) will be solid, indicating thatthe appliance is ready for use.5 Select the button that best suites yourneeds.* See “Speed Settings & Uses” chart.Using the Ninja® Kitchen System 1200 ™ - cont'dFig. 6 Fig. 7USING THE 6-BLADE ASSEMBLY1 Holding the 6-Blade assembly by theshaft, place it onto the gear shaft insidethe pitcher. Ensure that the attachmentfits around the gear shaft and that it isstanding straight.2 Add the ingredients and secure thepitcher lid onto the pitcher. (Fig. 8)3 Plug the power cord into the electricaloutlet and press on the power button ( ).NOTE: Please refer to “Speed Settings& Uses” chart for suggested uses andspeeds.Fig. 8Using the PitcherUSING THE WHIPPING ATTACHMENT1 Holding the whipping attachment by theshaft, place it onto the gear shaft insidethe pitcher. Ensure that the attachmentfits around the gear shaft and that it isstanding straight.2 Add the ingredients and secure thepitcher lid onto the pitcher. (Fig. 9)3 Plug the power cord into the electricaloutlet and press on the power button ( ).NOTE: Please refer to “Speed Settings& Uses” chart for suggested uses andspeeds.IMPORTANT: When using the whippingattachment for whipping egg whites,open the pouring spout cap after 30seconds to allow the egg mixture toaerate.Fig. 9NOTE: The handle will remain locked in theupward position until the lid is completelyseated on top of the container.BL700_30_SERIES_IB_ENG_110222_1.indd 10-11 11-02-22 2:50 PM