Ninja BL700 series Owner's Manual

Also see for BL700 series: Owner's guide Owner's guide

Contents

Ninja BL700 series Owner's Manual Manual pdf 7 page image

12 TOLL FREE: 1-800-798-7398 www.ninjakitchen.com 13USING THE DOUGH BLADEIMPORTANT: Use only the “DOUGH”button when using this attachment.IMPORTANT: DO NOT attempt to use thedough blade without using the suctionlever to secure the appliance to thecounter or table top first.1 Place the motor base on a clean, dry,level surface such as a counter or tabletop. (Fig. 11) Push the suction lever onthe side of the base down to secure thesuction feet to the surface. (Fig. 11a) Ifthe suction feet have not totally adheredto the surface, press down slightly onthe base to give the suction feet a bettergrip.2 Secure the bowl onto the motor base.3 Holding the dough blade by the shaft,place it onto the gear shaft inside thebowl. Ensure that the attachment fitsaround the gear shaft and that it isstanding straight.USING THE 4-BLADE ASSEMBLY1 Holding the 4-Blade assembly by theshaft, place it onto the gear shaft insidethe bowl. Ensure that the attachmentfits around the gear shaft and that it isstanding straight.2 Add the ingredients and secure the bowllid onto the bowl. (Fig. 10)3 Plug the power cord into the electricaloutlet and press on the power button ( ).NOTE: Please refer to “Speed Settings& Uses” chart for suggested uses andspeeds.Fig. 10Fig. 11Using the Bowl4 Add the ingredients and secure the bowllid onto the bowl. (Fig. 11)NOTE: For best results add wetingredients first and then add dryingredients.5 Plug the power cord into the electricaloutlet and press on the power button ( ).NOTE: Please refer to “Speed Settings &Uses” chart for suggested uses.6 Once finished making dough, remove thebowl from the motor base.7 To remove the motor base from thecounter or table top, pull the suctionlever up to release the suction feet.(Fig. 11b)WARNING: Never leave the applianceunattended while in use.NOTE: Lock-in lever activates suctionfeet for added stability.Fig. 12USING THE DOUGH PADDLEIMPORTANT: Use only the “DOUGH”button when using this attachment.IMPORTANT: DO NOT attempt to use thedough paddle without using the suctionlever to secure the appliance to thecounter or table top first.1 Place the motor base on a clean, dry,level surface such as a counter or tabletop. (Fig. 12) Push the suction lever onthe side of the base down to secure thesuction feet to the surface. (Fig. 12a) Ifthe suction feet have not totally adheredto the surface, press down slightly onthe base to give the suction feet a bettergrip.2 Secure the bowl onto the motor base.3 Holding the dough paddle by the shaft,place it onto the gear shaft inside thebowl. Ensure that the attachment fitsaround the gear shaft and that it isstanding straight.4 Add the ingredients and secure the bowllid onto the bowl. (Fig. 12)NOTE: For best results add wetingredients first and then add dryingredients.5 Plug the power cord into the electricaloutlet and press on the power button ( ).NOTE: Please refer to “Speed Settings &Uses” chart for suggested uses.6 Once finished making dough, remove thebowl from the motor base.7 To remove the motor base from thecounter or table top, pull the suctionlever up to release the suction feet.(Fig. 12b)WARNING: Never leave the applianceunattended while in use.NOTE: Lock-in lever activates suctionfeet for added stability.Fig. 12aFig. 11a Fig. 11bFig. 12bBL700_30_SERIES_IB_ENG_110222_1.indd 12-13 11-02-22 2:50 PM