Ninja BL770 series Owner's Manual

Also see for BL770 series: Owner's guide Owner's guide

Contents

Ninja BL770 series Owner's Manual Manual pdf 13 page image

12USING THE 4-BLADE ASSEMBLY1 Holding the 4-Blade assembly by the shaft, place itonto the gear shaft inside the bowl. Ensure that theattachment fits around the gear shaft and that it isstanding straight.2 Add the ingredients and secure the bowl lid onto thebowl. (Fig. 1)3 Plug the power cord into the electrical outlet and presson the power button ( ).4 Select the speed that best suits your needs. Pulseingredients evenly by pressing down in short intervals.NOTE: Please refer to “Speed Settings & Uses” chartfor suggested uses and speeds.5 When you have reached your desired consistency, stopthe appliance by pressing the power button ( ) andwait for the blade to stop turning.6 To remove the lid, pull the lid handle up to a 90° angleand lift the lid off. Turn the bowl counter clockwise andthen lift off the base. (Fig. 2, Fig. 3)NOTE: Do not exceed the highest measured marking.For meats, do not exceed 1 L marking.USEUSING THE DOUGH BLADEIMPORTANT: Use only the “DOUGH” button whenusing this attachment.IMPORTANT: Use the suction lever when using thedough blade on SPEED 1/DOUGH.1 Place the motor base on a clean, dry, level surface suchas a counter or table top. (Fig. 4) Push the suctionlever on the side of the motor base down to secure thesuction feet to the surface. (Fig. 4a) If the suction feethave not totally adhered to the surface, press downlightly on the base to give the suction feet a better grip.2 Secure the bowl onto the motor base.3 Holding the dough blade by the shaft, place it onto thegear shaft inside the bowl. Ensure that the attachmentfits around the gear shaft and that it is standing straight.4 Add the ingredients and secure the bowl lid onto the bowl.NOTE: For best results add wet ingredients first andthen add dry ingredients.5 Plug the power cord into the electrical outlet and presson the power button ( ).6 Once finished making dough, remove the bowl from themotor base. (Fig. 2, Fig. 3)7 To release the motor base from the counter or tabletop, pull the suction lever up to release the suction feet.(Fig. 4b)NOTE: The suction lever activates the suction feet foradded stability.Fig. 1SuctionLeverFig. 4ActivateSuctionReleaseSuctionFig. 4aFig. 4bFig. 2Fig. 3REMOVAL USE