Ninja Kitchen System Pulse BL200NZ Owner's Manual

Contents

Ninja Kitchen System Pulse BL200NZ Owner's Manual Manual pdf 9 page image

8CUSTOMER CARE - AU: 1800 890 8405 Wipe the motor base clean with a damp cloth.IMPORTANT: Make sure that the motor base isplugged in for use.1 Place the motor base on a clean, dry, level surface suchas a counter or table top.2 Add ingredients to the single serve cup.3 Place the single serve blade onto the cup and screw ittightly until you have a good seal. (Fig. 1)4 Turn the single serve cup upside down and place it ontothe motor base, aligning the tabs on the cup with themotor base. Turn to the left, the unit is ready for use.(Fig. 2)5 Press down on the top of the cup in short intervals toactivate. (Fig. 3)Fig. 1 Fig. 2Assembly and Use for the Single Serve CupFig. 3 Fig. 4 Fig. 5ASSEMBLY PULSE REMOVAL6 When you have reached your desired consistency, stopthe appliance by removing your hand from the singleserve cup. Then turn the single serve cup to the right(Fig. 4) and pull straight up to remove. (Fig. 5)NOTE: Do not overfill! To avoid spilling, do not addingredients past the “Max” fill line.7 Turn the cup upright and remove the single serve bladeby twisting the blade assembly anti-clockwise.8 Place the To-Go drinking lid onto the single serve drinkcup, twist to seal and enjoy!9 Make sure that the motor base is unplugged when not inuse.For best results, use short “PULSES”... Practice makes perfect!!