Ninja QB3001NZ Owner's Manual
Also see for QB3001NZ: Owner's guide
CUSTOMER CARE - AU: 1800 890 840CUSTOMER CARE - NZ: 0800 002 9999 10PROBLEMS POSSIBLE REASONS & SOLUTIONSMotor doesn’t start orblades don’t rotate.• Make sure the Nutri Ninja® cup is securely placed onto Power Pod.• Check that the plug is securely inserted into the electrical outlet.• Check fuse or breaker in your home. Replace fuse/reset breaker.• Check that the inside of the Power Pod is clean and there is no food blockingthe connection between Power Pod and Nutri Ninja® cup.• There is too much food in the container. Unplug the Power Pod. Removesome food and try again.• The unit has overheated. Unplug and wait approximately 15 minutes beforeusing again.Food is unevenly chopped.• Either too much food is being chopped at one time, or the pieces are notsmall enough. Try cutting the food into smaller pieces of even size andprocessing smaller amounts per batch.• Adjust pulse duration or pulse time.Food is chopped too finely oris too watery.• The food has been overprocessed. Use brief pulses or process for a shortertime. Let blades stop completely between pulses.Food collects on the sides ofthe Nutri Ninja® cup.• Too much food is being processed at one time. Turn the Power Pod off. Whenthe blades stop rotating, remove the cup from the Power Pod. Remove someof the food being processed.Snow from ice cannot beachieved.• Do not use ice that has been sitting out or has started to melt.• Be sure to use short pulses in the beginning to break up large pieces.Troubleshooting GuideRanero BurgerIngredients:4 oz London Broil, 2 inch chunksSalt & PepperNon-Stick SprayDirections:1. Place the meat into the 16-ounce Nutri Ninja® Cup.2. Hold down and blend continuously for 15 seconds. Form into one single patty and season with salt and pepper.3. Spray a large skillet with non-stick spray and over med-high heat, cook the burger 2-3 minutes per side formedium rare, or up to 5 minutes per side for well done. Serves 1.Nutri Ninja® CupSuggested RecipeONE (1) YEARLIMITED REPLACEMENT WARRANTY STATEMENTIf your product becomes defective due to faulty material or workmanship within a period of 1 year from the date of purchase,we warrant to do the following:• For New Zealand Consumers: We will replace the product with a new product, free of charge, or repair the productat our cost, at our discretion.• For Australian Consumers: Our goods come with guarantees that cannot be excluded under the AustralianConsumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any otherreasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail tobe of acceptable quality and the failure does not amount to a major failure.Your warranty is subject to the following conditions:• DO NOT operate the appliance with a damaged plug or cord, or if the unit has been dropped, damaged or droppedin water. To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance on your own. If thesupply cord is damaged, it must be replaced by a qualified electrician in order to avoid a hazard. Incorrectre-assembly or repair can cause a risk of electrical shock or injury to persons when the appliance is used.• The product has not been misused, abused, neglected, altered, modified or repaired by anyone.• The product has been subjected to fair wear and tear.• The product has not been used for trade, professional or hire purposes.• The product has not sustained damage through foreign objects, substances or accident.Your warranty does not cover:• Components that are subject to natural wear and tear caused by normal use in accordance with operating instructions.• Unauthorised/improper maintenance/handling or overload is excluded from this warranty.• For guarantee claims you will need to submit a proof of purchase in the form of a valid receipt that displays date andplace of purchase.This warranty does not replace but is in addition to your statutory rights.This warranty does not apply to accessories supplied with the product.This warranty applies only to the original purchaser and may not be transferred.Replacement products will be covered by the limited warranty for the balance of the warranty period from the date of theoriginal purchase.Please note:Only defective product or parts returned to place of purchase will be replaced under this warranty.New Zealand Contact: Australia ContactBrand Developers Limited Brand Developers Aust Pty LtdUnit H, 686 Rosebank Road, 461 Plummer Street,Avondale, 1026 Auckland, New Zealand PORT MELBOURNE, VIC 3207FAX: +64 9 306 8203 FAX: +61 3 9681 7825NZ Customer Care 0800 002 999 AUST Customer Care: 1800 890 840 |
Related manuals for Ninja QB3001NZ
Ninja QB3001NZ Owner's Manual
Ninja QB3000NZ Owner's Manual
Ninja FIT QB3001ANZ Owner's Manual
Ninja QB3001 Series Owner's Manual
Ninja QB3001UK series Owner's Manual
Ninja QB800NZ Owner's Manual
Ninja QB3000 Series Owner's Manual
Ninja Slim QB3001UK 30 Owner's Manual
Ninja QB1004 Owner's Manual
Ninja QB3000SS Series Owner's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine