Ninja Ultima BL820NZ Owner's Manual

Contents

Ninja Ultima BL820NZ Owner's Manual Manual pdf 14 page image

13CUSTOMER CARE - NZ: 0800 002 999Assembly and Use for the Bowl - cont.USING THE DISCSIMPORTANT: Use only the “DOUGH/DISC”setting when mixing dough or using eitherdisc.IMPORTANT: Use ONLY the Feed Chute Lidwhen using the discs.1 Place the motor base on a clean, dry, levelsurface such as a counter or table top.(Fig. 23)2 Secure the bowl onto the motor base.3 Place the disc gear shaft inside the bowl.4 Use the finger holes to grasp the selected discand place it over the gear shaft.5 Place the feed chute lid on the bowl and turnclockwise to lock in place. (Fig. 23)6 Plug the power cord into the electrical outletand press up on the power toggle ( ) to turnthe power “On”.7 Turn the variable speed dial to 10 (Dough &Discs).8 Press the Start/Stop/Pulse toggle up to havethe discs start spinning.9 Add the food that you want to slice, shred orgrate through the feed chute on the lid.(Fig. 23)10 The food pusher has two parts. Use theassembled food pusher to push the foodthrough the feed chute. (Fig. 23) If the foodto be sliced is of a small diameter, use thesmall feed chute by twisting the food pusherand removing the inner tube. Feed the food tobe sliced through the smaller chute.TIP: Twist the inner tube of the food pushercounter clockwise and pull to remove it fromthe food pusher.11 When finished, press the Start/Stop toggleup to stop the discs and then press thepower toggle down to turn the applianceoff. Remove the lid. Using the finger holes,carefully lift the disc out of the bowl.Fig. 23/