Ninka Qanto Instructions For Use Manual
Also see for Qanto: Instructions for useInstructions for use
                        | |
Contents
| 
8ENQanto_Id_A5_0000.50.65060_23032018-EN5. Assembly of Qanto1x1x5x4x 1x (2x)5.1 General assembly instructionsAnyone who performs connection or assembly work on Qanto or uses Qantomust have access to these instructions for use. Follow these instructions.Non-observance of the above mentioned instructions can lead to accidentsresulting in severe personal injury.If the product is visibly damaged, it must not be installed.During the installation of Qanto, make sure there is sufficient clearance forthe movement of the lifting system. When Qanto is extended upward and toboth sides, a clearance of about 200 mm to other cabinets or shelving mustbe observed.A clearance of 300 mm must be observed between Qanto and a gas stove.The electrical system of Qanto must be accessible (e.g., a double socketunder the cabinet near the base).Make sure the cables are undamaged.Before connecting Qanto to the power mains, you must check whether thevoltage on the control unit is correct.If the control unit causes unusual noises or odours during operation, interruptthe power supply.5.2 Delivery |
Related manuals for Ninka Qanto
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine