Nintendo DSi XL Operation Manual

Also see for DSi XL: Quick-stard guide Quick start guide

Nintendo DSi XL Operation Manual Manual pdf 8 page image

Using the Stylus and Touch Screen13Basics14 BasicsThe lower LCD screen, or Touch Screen, is touch sensitive. For games that include this game control feature,operate the screen by using the included stylus. Lightly touch or slide the stylus across the Touch Screen asshown below.IMPORTANT STYLUS AND SCREEN GUIDELINES:• Use the stylus ONLY on the Touch Screen (lower screen).• Use only enough pressure to operate the game. Excessive pressure may damagethe Touch Screen.• Do not use the stylus if it is broken.• Use only a Nintendo licensed stylus on the Touch Screen.• Replace the smaller stylus in the stylus holder when not in use.• If you use a screen protector on your Nintendo DSi XL, use only a Nintendo licensedscreen protector.IMPORTANT: If the Touch Screen becomes dirty or contaminated with foreign material, do notcontinue to use your Nintendo DSi XL. It may not work properly and can become moredamaged. Follow the cleaning procedures below. If it still does not work after cleaning, visitsupport.nintendo.com for information on repair service.You can adjust the Touch Screen if it doesn’t seem to respond properly or if the Touch Screen is notresponding to the same place you’re touching it.• If the Touch Screen is not responding properly, first try removing any screen protectors (sold separately)that you may have added to your Nintendo DSi XL.1. Select System Settings from the Nintendo DSi Menu.2. Select screen number 3 by tapping the #3 box at the top of the screen or by tapping the arrow onthe right side of the screen until you see the screen with the Touch Screen option.3. Select the Touch Screen option and follow the on-screen instructions.If you’re still unable to operate the Touch Screen properly...Try starting up your Nintendo DSi XL at the Touch Screen Calibration screen by following theprocedure below.1. While holding down the L Button, R Buttonand START...2. Press POWER. (Hold down the L, R, and START Buttonsuntil the Calibration screen appears.)3. Follow the on-screen instructions and then turn the power off. Turn the system on again tocheck the operation of the Touch Screen.If the screens on your Nintendo DSi XL have visible smudges, fingerprints, or other foreign material on them,you can clean them by using a soft clean cloth such as a lens or eyeglass cleaning cloth.1. Slightly dampen the cloth with water ONLY and wipe off the screens to loosen any dirt or foreignmaterial.2. Using a dry cloth, wipe the screens to dry them and finish the cleaning process. If needed, repeat theprocess.Using the Nintendo DSi XL StylusCalibrating the Touch ScreenScreen Cleaning Procedure