QUCM Modbus ASCII Modem Application ManualQUCM Modem DialerInstallation and Programming ManualThis Manual describes the QUCM application for interfacing remote Modbus and PowerLogic slaves through dial-up modems via Modbus ASCII, Modbus RTU, and PNIM from a Modbus/TCP Ethernet system.Effective: 17 May, 2004Niobrara Research & Development CorporationP.O. Box 3418 Joplin, MO 64803 USATelephone: (800) 235-6723 or (417) 624-8918Facsimile: (417) 624-8920www.niobrara.com

Introduction

Installation

Port 1 to the Personal Computer

Serial Connections to the MUCM-002

MUCM Port 2 to the Slaves

Using ZAPREG32.EXE to set the IP Address

QLOAD QUCM Firmware Update

QLOAD APP1 and APP2

Loading the Application into the MUCM

QLOAD MUCM Firmware Update

QLOAD MUCMAPP1

Operation

MUCM Operation

Web Server

Figure 4-1 Main Page with three devices configured

Figure 4-2 Device

Configuration

Password

Edit Title

Figure 4-4 Configuration

Figure 4-5 Serial Port

Statistics

Help

Examples

Figure 5-1 Example system setup

Figure 5-2 Example Configuration

Troubleshooting

Testing the RS-485 network on the MUCM

Niobrara QUCM-OE Installation And Programming Manual

QUCM-LE

QUCM-OE

QUCM-SE