User Manual of NVR Series DVRPage 45 Total 1045.4 Video Output Standard and VGA SetupVideo output standardThere is one VOUT BNC connector at the rear panel of DVR. It is used to connect withanalog monitor and can support PAL or NTSC video output. You can modify video outputstandard to match video input.In “Display” menu:There is a list box named “Video Output Standard”, you can use【 】【 】key to select PALor NTSC video output.VGA setupThere is one VGA interface at the real panel of DVR. You can use it to connect with VGAdisplay. You can define VGA resolution, refresh frequency in “Display” menu.There are following options: 1024*768/60Hz, 800*600/60Hz and 800*600/75Hz. You canuse【 】【 】key to select.Press “Confirm” button to save or “Cancel” to abort.
