Nitro NVR4SGX User Manual
                                                                                                        | |
Contents
| 
User Manual of NVR Series DVRPage 56 Total 1045.10 Motion Detection AlarmIf you enable this function, when there is motion detected, DVR will make alarm.Step 1: Enter into “Image Setup” menu:Step 2: Select camera: Use【 】【 】key to select one camera.Step 3: Select motion detection sensitivity: On the right side of “Motion Det. Level” item,there is a list box. That is motion detection sensitivity. There are 7 options, from 0 (the lowest) to5 (the highest) and “Off”. You can use【↑】【↓】keys to select one. If you select “Off” option,DVR will not response even if there is motion detection. If you select other options, it will active“Motion Area Setup” button and “Policy Setup” button. If you select low sensitivity such as 0,only when there are great motion detection, DVR can response. On the other side, for highsensitivity such as 5, DVR will response with small motion detection.Step 4: Motion area setup: You must define motion areas so that DVR will response whenthere is motion in those areas. Move “Active Frame” to “Area” buton on the right side ofsensitivity list box, press【ENTER】key, you can enter into “Motion Area Setup” interface. |
Related manuals for Nitro NVR16SAX
manualsdatabase
Your AI-powered manual search engine