Nitto Kohki DLV04C10L-AY Instruction Manual

Contents

Nitto Kohki DLV04C10L-AY Instruction Manual Manual pdf 59 page image

57ENLCD display listLCD display Details ReferenceBACK LIGHT LCD back light p. 34BZ-VOLUME (Buzzer Volume)Buzzer sound volumep. 34C-AUTO (Continue Auto)Setting to determine as screw fastening operations OK if all operations channels areimplemented and completed in sequencep. 25C-F (Count Finish)Setting to output OK signal at time the screw fastening operations are completedp. 33CH1CH2CH3CH4(Channel)The folder in which the settings are saved—CH-CHG (Channel Change)Operations channel switching methodp. 25CHECK-BZ (Check Buzzer)Check buzzer soundp. 34COUNT Screw count p. 31COUNT UP-BZ (Count-up Buzzer)Count-up (normal torque-up) buzzer soundp. 30COUNT-FNC (Count Function)Count functionp. 31COUNT-RTN (Count Return)Count return (return to screw fastening count number) functionp. 33CRT-T (Correct Timer)Screw fastening time judgment functionCount up the screw fastening within the upper and lower limit setting valuesp. 32CRT-T-L (Correct Timer Lower)Screw fastening time lower limit valueScrew fastening NG (count not performed) for screw tightening shorter than the settingvaluep. 32CRT-T-U (Correct Timer Upper)Screw fastening time upper limit valueScrew fastening NG (count not performed) for screw tightening longer than the settingvaluep. 32DIS (Disable)Setting value when CRT-T-U (screw fastening upper limit value) function is set to invalidp. 32FSTN-NG-BZ (Fastening NG Buzzer)Fastening NG buzzer soundp. 30FSTN-T (Fastening Timer)Fastening timerFastening time setting value at setting speed when at the HARD fastening mode settingp. 28FSTN-TYPE (Fastening Type)Setting of fastening type, “SOFT” and “HARD”p. 26HARD HARD fastening mode p. 26INPUT Setting to call the specified channel (setting) using input signal channel A/B p. 25MEAS-T Fastening time measurement value at constant low speed, for calculating the fasteningtimer setting reference value “RET-T”p. 28NG-BZ (NG Buzzer)Operations NG buzzer soundp. 33OK-BZ (OK Buzzer)Operations OK buzzer soundp. 33OK-OUT-T (OK Out Timer)Screw fastening confirmation timePossible time for reverse rotation action confirming the screw fastening operation afterscrew tightening up to the set count number (time until OK is output)p. 33OK-TIMING OK output timingTiming setting for outputting the OK signalp. 33RATE Rate for calculating the fastening timer setting reference value “REF-T” p. 28REF-T Fastening timer setting reference value p. 28