Nitto Kohki DLV30S06L-AY Instruction Manual

Contents

Nitto Kohki DLV30S06L-AY Instruction Manual Manual pdf 20 page image

18EN7 Basic SettingsOperation modeThe tool can be set to handle various screw tightening.You can enter each mode from the screw fastening mode.For details on operation and the operation of each function, see the reference page.Mode Operation Operation to return to screw fastening mode ReferenceChange channel Press and hold the [UP] button Press and hold the [MEMORY] button or[SELECT] button p. 22Check set values The changeover switch in neutral +Start switch ON Start switch OFF p. 23Motion setting mode Press and hold the [MEMORY] button+ [UP] buttonPress and hold the [MEMORY] button or[SELECT] button p. 24Function setting mode Press and hold the [MEMORY] button+ [SELECT] buttonPress and hold the [MEMORY] button or[SELECT] button p. 34Lock/unlock keys Press and hold the [MEMORY] button Return automatically p. 41Screw count reset Press and hold the [SELECT] button Return automatically p. 38Count return modeThe changeover switch at the reverseside + press and hold the [DOWN]buttonReturn automatically, or press and holdthe [SELECT] button, or operate thechangeover switchp. 39Data receiving mode Press and hold the [MEMORY] button+ [DOWN] button.Return automatically, or press and holdthe [SELECT] button p. 43Motion settings listCAUTIONzz Always record the set values. You can utilize “Setting memo” (p. 70).If the tool fails, all settings may be initialized. Also, settings may be initialized at the time of repair in order tocheck operation.Please note that there is no function to output the set values to an outside device.In screw fastening mode, press and hold the [MEMORY] button and [UP] button to enter the motion setting mode. Forthe operation procedure, see “9 Motion Setting” (p. 24).The following settings are available.No. Function Set values and operation Default1 Screw count 1 - 99 screws 12 Speed level at start Level 1 - 9(Parameter LED display is L1, L2...L9) L93 Rotation time at start 0 sec.: 1st stage rotation setting is OFF / 0.01 - 0.99 sec.: 0.01sec. intervals / 1.0 - 9.9 sec.: 0.1 sec. intervals 04 Speed level at middle Level 1 - 9(Parameter LED display is L1, L2...L9) L95 Rotation time at middle 0 sec.: 2nd stage rotation setting is OFF / 0.01 - 0.99 sec.: 0.01sec. intervals / 1.0 - 9.9 sec.: 0.1 sec. intervals 06 Speed level at finish Level 1 - 9(Parameter LED display is L1, L2...L9) L97 Lower limit of screw fastening time 0 sec.: Lower limit of screw fastening time is OFF / 0.01 - 0.99sec.: 0.01 sec. intervals / 1.0 - 9.9 sec.: 0.1 sec. intervals 08 Upper limit of screw fastening time 0 sec.: Upper limit of screw fastening time is OFF / 0.01 - 0.99sec.: 0.01 sec. intervals / 1.0 - 9.9 sec.: 0.1 sec. intervals 09 Auto reverse mode setting 0: OFF / 1: Reversal after torque-up / 2: Reversal after lowerlimit of screw fastening time 010 Reverse speed level Level 1 - 9(Parameter LED display is L1, L2...L9) L911 Reverse rotation time 0 sec.: Reverse setting is OFF / 0.1 - 0.99 sec.: 0.01 sec.intervals / 1.0 - 9.9 sec.: 0.1 sec. intervals 0TV07521-1_DLV30S12P-AYK_en.indb 18 2017/02/10 15:56:32