Nitto Kohki DLV30S06L-AY Instruction Manual

Contents

Nitto Kohki DLV30S06L-AY Instruction Manual Manual pdf 30 page image

28ENSetting auto reverse modeAuto reverse mode means a motion to switch the electric screwdriver rotation direction automatically to the reverse.This mode is used when tightening a screw temporarily, intentionally loosening a screw (screws for terminal blocks,etc.) or checking a screw hole.CAUTIONzz When the setting is “Reverse after the lower limit of screw fastening time”, if the lower limit of screw fasteningtime is set to 0 sec. (OFF), the electric screwdriver does not start.You must set a numeric value for the lower limit of screw fastening time.zz Depending on the fastening conditions, the screw may not be loosened when in reverse rotation.Increase the reverse speed level. If the screw is still not loosened, the “Reverse after torque-up” function cannotbe used. You must use “Reverse after the lower limit of screw fastening time.”zz If the reverse rotation time is too short, the rotation may not be transmitted to the bit.Set this item after checking the actual rotation status.1 Setting the speed level and time (p. 26)2 In screw fastening mode, press and hold the [MEMORY] button and the [UP] buttonThe buzzer sounds, the main LED lights in purple and the workpiece LED goes OFF.3 Press the [SELECT] button to select No. 9 (Auto reverse mode)Lights in greenLights in redScrew count lights4 Press the [UP] button or [DOWN] button to select auto reverse modeSetting Details Remarks0 OFF OFF regardless of the set value of motion No. 10 and 111 Reverse after torque-up Screw tightening is operated with the No. 2 to 8 setting2 Reverse after the lower limit of screwfastening time Screw tightening is operated with the No. 2 to 7 setting5 Press the [SELECT] button to select No. 10 (reverse speed level)6 Press the [UP] button or [DOWN] button to select the speed level (1 - 9)7 Press the [SELECT] button to select No. 11 (reverse rotation time)8 Press the [UP] button or [DOWN] button to select the time (0 - 9.9 sec.)9 Press and hold the [MEMORY] button to save the settingTV07521-1_DLV30S12P-AYK_en.indb 28 2017/02/10 15:56:34