Nivus CSM Series Technical Instructions
                                                                                    | |
Contents
| 
Technical Instructions forCorrelation SensorsPage 44 Correlation Sensors – Rev. 07 as of 20.04.2016®5.4 Sensor InstallationWARNING Leakage due to removing componentsRemoving or loosening from ground plate or cable gland result in leakage andtherefore will cause measurement and sensor failure.Do absolutely not remove any parts of the sensor!! Otherwise warranty aswell as Ex protection will expire!The installation of the sensors is described in the separately "Installation Manualfor Sensors".Please refer to:- selecting sensor positions- required calming sections- sensor installation and fastening- cable layoutPlease anyway observe the hints on sensors with integrated pressure cell in thismanual (chapters 5.7 and 5.8).5.5 Mounting the protection hose for the sensor, type CS2It is possible to optionally install a cable protection hose on the sensor.To do this unscrew the 4 screws of the protective cover (see Fig. 5-17)1 Protective cover screwsFig. 5-17 Unscrewing the protective coverPush the protection hose over the cable subsequently as depicted in Fig. 5-18. |
Related manuals for Nivus CS2 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine