Nokia 002J900 User Manual

Also see for 002J900: Datasheet

Contents

Nokia 002J900 User Manual Manual pdf 71 page image

● Scan for networks — If you set Show WLANavailability to Yes, you can select how often the devicesearches for available WLANs and updates the indicator.● Internet connectivity test — Select whether you wantthe device to test the internet capability of the selectedWLAN automatically, to ask for permission every time, orto never perform the connectivity test. If you select Runautomatically or allow the test to be performed when thedevice asks for it, and the connectivity test is performedsuccessfully, the access point is saved to the internetdestinations.To view advanced settings, select Options > Advancedsettings. Changing the advanced settings for the WLAN is notrecommended.Access pointsCreate a new access pointSelect Menu > Settings and Connectivity >Destinations.You may receive access point settings in a message from aservice provider. Some or all access points may be preset foryour device by your service provider, and you may not be ableto change, create, edit, or remove them.When you open one of the access point groups ( , , ,), you can see the access point types:indicates a protected access pointindicates a packet data access pointindicates a wireless LAN (WLAN) access pointTip: You can create internet access points in a WLANwith the WLAN wizard.To create a new access point, select Access point. Thedevice asks to check for available connections. After thesearch, connections that are already available are shown andcan be shared by a new access point. If you skip this step, youare asked to select a connection method and to define thesettings needed.To edit the settings of an access point, open one of the accesspoint groups, and select an access point. Follow theinstructions from your service provider.● Connection name — Enter a name for the connection.● Data bearer — Select the data connection type.Depending on the data connection you select, only certainsetting fields are available. Fill in all fields marked with Mustbe defined or with a red *. Other fields can be left empty,unless your service provider has instructed otherwise.To use a data connection, your service provider must supportthis feature, and if necessary, activate it for your SIM card.Create access point groupsSelect Menu > Settings and Connectivity >Destinations.Some applications allow you to use access point groups fornetwork connections.To avoid selecting a single access point every time the devicemakes a network connection, you can create a group thatConnectivity© 2009 Nokia. All rights reserved. 71