Nokia 002J900 User Manual

Also see for 002J900: Datasheet

Contents

Nokia 002J900 User Manual Manual pdf 72 page image

contains various access points to connect to that network anddefine the order in which the access points are used.For example, you can add wireless LAN (WLAN) and packetdata access points to an internet access point group, and usethe group for browsing the web. If you give WLAN the highestpriority, the device connects to the internet through WLAN,if available, and through a packet data connection if not.To create a new access point group, select Options >Manage > New destination.To add access points to an access point group, select thegroup and Options > New access point. To copy an existingaccess point from another group, select the group, tap therelevant access point if it is not already highlighted, andselect Options > Organise > Copy to other dest..To change the priority of an access point within the group,select Options > Organise > Change priority.Packet data access pointsSelect Menu > Settings and Connectivity >Destinations > Access point, and follow the instructionson the screen.To edit a packet data access point, open one of the accesspoint groups, and select an access point marked with .Follow the instructions from your service provider.Select from the following:● Access point name — You obtain the access point namefrom your service provider.● User name — The user name may be needed to make adata connection, and is usually provided by your serviceprovider.● Prompt password — If you must enter the passwordevery time you log in to a server, or if you do not want tosave your password in the device, select Yes.● Password — A password may be needed to make a dataconnection and is usually provided by your serviceprovider.● Authentication — Select Secure to always send yourpassword encrypted or Normal to send your passwordencrypted when possible.● Homepage — Depending on the access point you aresetting up, enter the web address or the address of themultimedia message centre.● Use access point — Select After confirmation if youwant the device to ask for confirmation before theconnection using this access point is created, orAutomatically if you want the device to connect to thedestination using this access point automatically.Select Options > Advanced settings and from thefollowing:● Network type — Select the internet protocol type totransfer data to and from your device. The other settingsdepend on the selected network type.● Phone IP address (for IPv4 only) — Enter the IP addressof your device.● DNS addresses — Enter the IP addresses of the primaryand secondary DNS servers, if required by your serviceprovider. To obtain these addresses, contact your internetservice provider.Connectivity© 2009 Nokia. All rights reserved.72