10Extend the antenna fully.As with any other radio transmitting device, avoidprolonged contact with the antenna when the phone isswitched on.1) Press the PWR key and hold it for at least 2 seconds.The phone will carry out a short self-test sequence, thenbriefly display its programmed name or number.2) When the ON indicator appears on the display, thephone is ready for use.If NO SVC appears it likely means that you are outside thecellular service area and the network cannot serve you.A cellular phone can only send and receive callswhen it is switched on.3) Press the PWR key and hold it for at least 2 seconds toswitch the phone off.Fully extend the antenna beforesending or receiving a call.Note: Push in the antenna whenyou are not using the phone.You can use the phone withoutextending the antenna in agood coverage area (see‘Signal Strength’).1) Key in the number (includethe area code, if you’re makinga long distance call).If you make a mistake, press the CLR key to delete the lastkeystroke; or to clear the whole display, press and hold theCLR key.2) The number will appear on the display.3) Press SEND.PLACING A CALLSWITCHING ON (OR OFF)OPERATION OF THE PHONE