M e n u f u n c t i o n s25ProfilesYou can customize the profiles to use certain features, such as ringing tones andscreen saver.Select Menu > Settings > Profiles. Select the profile that you want to modify,then Customize.You can also change the settings of the currently selected profile in the Tonesettings menu (see "Tone settings," p. 24), and Display settings menu(see "Display settings," p. 24).To activate a profile quickly in the standby mode, press the end key quickly,scroll to the desired profile, and select OK.Time settingsSelect Menu > Settings > Time settings and one of the following options:Clock—To hide or show the clock, to set the time, or to edit the time formatDate setting—To set the dateAuto-update of date and time (network service)—To set your phone to automaticallyupdate time and date from networkUsing this feature may cause some set alarms to expire.If the battery was removed from the phone, you may need to set the time anddate again.Call settingsSelect Menu > Settings > Call settings and one of the following options:Call forwarding (network service)—To forward your incoming calls to your voicemailbox or to some other phone numberSelect the forward option you want, for example, select Forward if busy to forwardthe calls when you are on a call or when you reject a call.Several forward options may be active at the same time. When Forward all voicecalls is activated, is shown on the display in the standby mode. To deactivateall call forwards, select Cancel all call forwardingTo set the selected forward option on, select Activate; to set it off, select Cancel; tocheck whether the selected option is active, select Check status ; to specify a delayfor certain forwards, select Set delay time (not available for all forward options).Automatic redial—To set your phone to make up to ten attempts to connect thecall after an unsuccessful call attemptCall waiting (network service)—To let the network notify you of a new incomingcall while you have a call in progress