S e t t i n g s43Save information1. Select Menu > Settings > Call settings > Calling card.2. Enter your security code, and select OK.3. Scroll to one of the four memory locations, and select Options > Edit > OK >Dialing sequence .4. Select one of the following sequence types:Access no. + phone no. + card no.—Dial access number, phone number, thencard number and PIN, if required.Access no. + card no. + phone no.—Dial access number, card number and PIN,if required, then phone number.Prefix + phone no. + card no.—Dial the prefix (numbers that must precede thephone number) and phone number you want to dial, then the card numberand PIN, if required.5. Enter the required information (access number or prefix and card number),and select OK to confirm your entries.6. Select Card name.7. Enter the card name, and select OK.Contact your calling card company for more information.Make callsAfter you have saved your calling card information in your phone, you can make acall using your calling card.1. Select Menu > Settings > Call settings > Calling card.2. Enter your security code, and select OK. (See "Change the security code,"page 51.)3. Scroll to the calling card of your choice, and select Options > Select.4. Press the end key to return to the standby mode; then enter the phonenumber, including any prefix (such as 0 or 1) that your calling card mayrequire when you make a calling card call. See your calling card forinstructions.5. Press and hold the call key for a few seconds until Card call is displayed.6. When you hear the tone or system message, select OK.N1315_UG_EN_Non-RUIM_Vivo_FCC_0804.fm Page 43 Friday, August 4, 2006 6:02 PM