General FunctionsoAQNote:You can find the security code in a red envelope in thesales package of your phone.A welcome message will appear, if programmed withinMenu 91. If you do not want this message to be dis-played next time, delete it by pressing the Erase selec-tion key. If you want to retain the message for later use,press the Keep selection key.For more information on welcome messages, see Wel-come Note (Menu 9 1) in chapter Menu Functions.If you are in the service area of a cellular network whichcan serve you, the name of the network operator and the~ indicator will appear. The phone is now ready for use.Please read carefully Security Level (Menu 5 2) in chapterMenu Functions and then select the desired security level.If the phone does not work with the newly inserted SIM card,see The SIM Card in chapter Getting Started.The phone can make and receive calls only when it isswitched on, has a valid SIM card fitted and is located in theservice area of the cellular network (~ is shown).However, emergency calls to the international emergencynumber 112 can usually be made without the SIM card.Check with your network operator.Note; When the phone loses contact with the network, youcan try to re-establish the contact by pressing any key of thephone. If this has no effect, enter the menu Network Selec-tion (Menu 7) and perform automatic or manual networkselection. See Network Selection (Menu 7) in chapter MenuFunctions.SWITCHING OFF~ Press and hold the@ key for a second.27