M e s s a g e s39Set up voice mail with dialing codes1. In the standby mode, select Contacts > 1-touch dialing.2. Scroll to an empty 1-touch dialing slot, and select Assign.3. Enter your voice mailbox number, including the area code.4. Refer to dialing codes, and enter codes as necessary using the informationthat you saved from "Voice mailbox number and process," page 38.For example, if you pause for 5 seconds after connecting to voice mail, enter ptwice after the voice mailbox number (for example, 2145551212pp).5. Enter any remaining pauses or other information that allows you to listen toyour messages, and select OK.6. Enter a name (such as voice mail), and select OK.To dial and listen to your voice mail, press and hold the assigned 1-touch dialingkey in the standby mode.■ Picture messagesPicture messaging is a network service. If your wireless service provider supportsthis feature, your device comes with five preloaded pictures. You can, however,over-write any of the five pictures that come with your device. Pictures can beattached to a message and sent using text messaging to compatible devices orPCs. Picture messages behave the same as text messages, but pictures take upmore space than text. Pictures are stored in the templates folder at Menu >Messages > Text messages > Templates.Note: Picture message function can be used only if it is supported by yournetwork operator or service provider. Only compatible devices that offer picturemessage features can receive and display picture messages.Copyright protections may prevent some images, ringing tones, and other contentfrom being copied, modified, transferred, or forwarded.Write and sendWhen a picture is added to a text message, the message converts to picture message.The message counter in the upper right of your display shows the charactersavailable for you to type in.1. In the standby mode, selectMenu > Messages > Text messages > Createmessage > Text > Edit message.2. Write a message using the keypad (or enter nothing if you choose to just senda picture), and select Options > Insert picture.
