S e t t i n g s53In the standby mode, select Menu > Settings > Time and date settings > Auto-update of date & time > On, Confirm first, or Off.If you use the Auto-update of date & time option while outside your digitalnetwork, you may be prompted to enter the time manually. Network time willreplace the time and date when you re-enter your digital network.If your battery is removed or discharged outside the digital network, you may beprompted to enter the time manually (once the battery is replaced or rechargedand you are still outside of the digital network).■ Voice commandsVoice commands allow you to quickly perform certain commands by speakingthem, instead of using the keypad to access them. For example, you can switchyour profile, call voicemail, playback a voice memo, or review recent calls byspeaking the recorded command.Add a voice commandBefore using a voice command, you must add the command to the device function.1. In the standby mode, select Menu > Settings > Voice commands.2. Select the device function you wish to tag: Profiles, Voice mailbox, Voicerecorder, or Call log.3. If necessary, select an option associated with that function, and selectOptions > Add command.4. Select Start, and speak the voice command clearly into the microphone.Do not select Quit unless you want to cancel the recording.The device replays then saves the recorded command. appears next tofunctions that have voice commands assigned.Activate a voice commandAfter you have associated a voice command with a device function, you canrequest the function by speaking the voice command.1. In the standby mode, select and hold Contacts.2. When Speak now appears, say the voice command clearly into the microphone.When the device finds the voice command, Found: appears, and the device playsthe recognized voice command through the earpiece. The function you requestedis activated.
