S e t t i n g s55FCC DRAFTDateShow or hide the dateIn the standby mode, select Menu > Settings > Time and date settings > Date >Show date or Hide date.Set the dateIn the standby mode, select Menu > Settings > Time and date settings > Date >Set the date, enter the date, and select OK.Change the date format1. In the standby mode, select Menu > Settings > Time and date settings >Date > Date format and the format of your choice.2. With Date on the display, select Date separator, and the separator of yourchoice.Set the auto-update of date and timeAuto-update is a network service. See "Network Services," page 7.If your wireless service provider supports this feature, you can allow the digitalnetwork to set the clock, which is useful when you are out of your home area (forexample, when you have traveled to another network or time zone).In the standby mode, select Menu > Settings > Time and date settings > Auto-update of date & time > On, Confirm first, or Off.If you use the Auto-update of date & time option while outside your digitalnetwork, you may be prompted to enter the time manually. Network time willreplace the time and date when you re-enter your digital network.If your battery has been removed or has discharged outside the digital network,you may be prompted to enter the time manually (once the battery is replaced orrecharged, and you are still outside of the digital network).■ Tone settingsFrom this menu, you can adjust the ringing volume, keypad tones, and other tonesettings for the currently active profile. See "Customize a profile," page 48.