S e t u p y o u r p h o n e184. Select Flash and the first participant is put on hold.5. When the second participant answers, press the send key to connect the calls.6. To end the conference call, press the end key.■ Answer callsAnswer, silence, or decline an incoming callSilence and Decline are carrier dependent features.1. Press the call or Answer key to answer the call.2. To mute the ringing tone, select Silence. If you do not answer the call, the callis forwarded to voicemail.3. To dismiss and forward the call to voicemail (a carrier dependent feature), selectDecline after you have muted the ringing tone, or press the end key at any time.Answer a call with the keypad lockedTo answer a call with the keypad locked, press the send key. During the call, allfeatures function normally. When you end, silence or decline the call, the keypadautomatically relocks. See "Keyguard," p. 19.When the keyguard is on, calls still may be possible to the official emergencynumber programed into your device.Adjust the earpiece volumeWhile in a call, scroll up or down to adjust the volume of the earpiece.When you adjust the volume, a bar chart appears in the display to indicate thevolume level.Use the loudspeakerYou can use your device as a loudspeaker during a call.• To activate the loudspeaker, select Loudsp.• To deactivate the loudspeaker during a call, select Handset.The loudspeaker is deactivated automatically when a call (or a call attempt) ends,or when certain enhancements are connected.Warning: Do not hold the device near your ear when the loudspeaker isin use, because the volume may be extremely loud.