345) The phone then prompts you for other information,such as Access number and Card number.Enter this information at each prompt and press leftÒ (OK).6) You can enter the calling card name by pressing ˜when the phone prompts you for the access numberor card number. The phone will then prompt you forthe card name. Enter it and press left Ò (OK).To change stored calling card information (such asyour card number), go through these steps, but usethe ˘ key to erase already stored information. Key inthe new information then press left Ò (OK).Menu 3 8, Message ModeSee “Message Mode” on page 16 for a description of thisfunction.Menu 4, Phone SettingsMenu 4 1, LightsWith lights on, the keypad lights come on when you pressa key or have an incoming call, and go off 15 secondslater.When the phone is connected to a car kit, desktop charger,or cigarette lighter charger, the keypad lights are onpermanently when this setting is ON; when this setting isOFF, the lights come on when you press a key or have anincoming call, and go off 15 seconds later.Note: You can turn on the lights for 15 seconds by pressingthe power key quickly, regardless of this setting.Menu 4 2, Keypad TonesYou can select the volume level or turn off the sound thephone makes when you press a key.Note: The keypad tone volume is set separately for eachaccessory you use.