Nokia 2255 User Manual

Also see for 2255: User guide Manual Antenna Description and Troubleshooting Baseband Description and Troubleshooting Disassembly/Assembly

Copyright © 2005 Nokia. All rights reserved.S e t t i n g s26Voice privacy—Let you protect theprivacy of your current phoneconversation from other callers placingphone calls on your network. Select Onor Off.■ Network settingsYou can set your device to roam orsearch for another network when youare not in your home area. Your deviceis set to search for the most cost-effective network. These options arenetwork operator dependent and maydiffer from those described.In standby mode, select Menu >Settings > Network settings >Network. Select Home only to makeand receive calls in your home areaonly, or Automatic to search for servicein another digital network. Theroaming rate applies when not in thehome service area. Press OK, ifnecessary, to confirm the activation.Network feature settingStore a feature codeFeature codes can be set for Call divert,Call waiting, and Send my caller IDwith next call network services.1. In standby mode, select Menu >Settings > Network settings >Network feature setting and anoption.2. Select an option within thatservice. For example, Call divert >Divert all voice calls > Activate.3. At the Feature code: prompt,enter the appropriate feature code(5 characters or less).You can enter other feature codes,or press the end key to return tostandby mode. When you enter anetwork feature code, the feature isvisible in the Call settings menu.Call divertCall divert tells your network toredirect incoming calls to anothernumber. Call divert is a network serviceand may not work the same in allnetworks, so contact your wirelessprovider for availability.1. In standby mode, select Menu >Settings > Call settings > Calldivert and one of the followingoptions:Divert all voice calls—Divert all callsto the number you specify.Divert if busy—Divert incomingcalls when you are in a call.Divert if not answered—Divertincoming calls to another numberif you are unable to answer.You can set a delay beforediverting takes place.