[ 66 ]Advanced featuresSET FIXED TOUCH TONE LENGTHYou can also specify touch tone lengthwhen using the Fixed option.1 Press Menu 4-2-2-2 (Settings >Phone settings > Touch tones >Touch tone length).2 Scroll to Short (1/10 seconds) or Long(1/2 seconds), then press Select.Send a touch tone stringmanuallyBefore you begin, make sure that Manualtouch tones is not set to Off.1 During a call to the automatedservice, press Options, scroll toTouch tones, and press Select.2 Enter the touch tone string fromyour phone keypad as required bythe service you are calling, thenpress Tones.Send touch tone string fromphone bookYou can save a touch tone string as aseparate phone book entry, then recalland send the string using the in-callmenu option Touch tones.SAVE TOUCH TONES AS A PHONEBOOK ENTRYSave the touch tone string (including anypause or wait characters that may berequired) to a new entry in the phonebook. For more information on savingand number to your phone book see“Saving contacts and numbers” on page31.RECALL A TOUCH TONE STRINGFROM THE PHONE BOOK1 During a call to the automatedservice, press Options, scroll toTouch tones, and press Select.2 Press Search, scroll to the touchtone string entry in your phone book,then press OK.3 Press Tones to send the touch tones.Store a touch tone string withphone numberYou can store touch tone strings (forexample, voice mailbox number and PINcode) as a part of a phone book entry.Once the string is stored, it is sentautomatically (instead of entering thetouch tones from the keypad).1 Enter the phone number of theautomated service.2 Use the */+ key to enter a w or pafter the number.• w (wait)-The phone waits for you topress Send. When you press Send,the phone sends the touch tonestring you’ve saved.• p (pause)-The phone pauses for 2.5seconds, then automatically sendsthe touch tone string you havesaved.3 Enter the touch tone string after thew or p characters as required by theservice.Example: 214-555-1234w1234#p5678#