2 Insert the card into the memory card slot with the contact surface facing up, andpress until it locks into place.3 Close the cover of the memory card slot.Remove the microSD cardImportant: Do not remove the memory card during an operation when the card isbeing accessed. Doing so may damage the memory card and the device, and corruptdata stored on the card.You can remove or replace the memory card during phone operation without switchingthe device off, but you need to ensure that no application is currently accessing thememory card.Charge the batteryYour battery has been partially charged at the factory. If the device indicates a lowcharge, do the following:1 Connect the charger to a wall outlet.2Connect the charger to the device.3 When the device indicates a full charge, disconnect the charger from the device,then from the wall outlet.You do not need to charge the battery for a specific length of time, and you can use thedevice while it is charging. If the battery is completely discharged, it may take severalminutes before the charging indicator appears on the display or before any calls can bemade.6 Get started© 2009 Nokia. All rights reserved.6