S e t t i n g s65Access no.+card no.+phone no.—Dial the access number for the calling card,card number (plus PIN if required), then enter the phone number.Prefix+phone no.+card no.—Dial the prefix (numbers that must precede thephone number) and phone number, then enter the card number (plus PIN ifrequired).4. Enter the required information (access number or prefix and card number),and select OK to confirm your entries.5. Select Card name , enter the card name, and select OK.Select a calling cardYou can select one of the calling cards for which you have saved information. Theselected card information is used when you make a card call.1. Select Menu > Settings > Call > Calling card.2. Enter your security code, and select OK. See "Security," p. 74.3. Select the calling card of your choice.Make card callsAfter you have selected a calling card, make a card call.1. Enter the phone number, including any prefix (such as 0 or 1) that yourcalling card may require when you make a calling card call. See your callingcard for instructions.2. Press and hold the send key for a few seconds until Card call is displayed.3. Follow the instructions on the screen.4. When you hear the tone or system message, select OK.Data and fax callsData and fax calling is a network service. See "Network services," p. 6. If yournetwork operator supports this feature, you can set up the device to send orreceive data and fax calls when connected to a device such as a PDA or PC.Receive data or fax callsFor better performance during data or fax calls, place the device on a stationarysurface. Do not move the device or hold it in your hand during a data call.
