M e d i a1. When the radio is on, select or to change the radio frequency in0.1 MHz steps, or select and hold or to start the channel search.Searching stops when a channel is found.2. To save the channel, select Options > Save channel.To save the channel to a memory location 1 to 9, press and hold thecorresponding number key while the radio is playing. To save the channel inthe memory location from 10 to 20, press briefly 1 or 2 and the desirednumber key 0 to 9.3. Enter a name for the channel, and select OK.4. Select an (empty) location to save the channel.■ Voice recorderThis feature enables you to record pieces of speech or sound with your device andlisten to them later. The total available time is 3 minutes with no memos stored.The maximum length of a recording depends on how much memory remainsavailable.In the standby mode, select Menu > Media > Recorder > Record to start therecording or Recordings list to manage the folder you have defined for recordingstorage.Record speech or sound1. In the standby mode, select Menu > Media > Recorder > Record.2. After you hear the recorder start tone, begin recording speech or sound.3. When you finish recording, select Stop and your recording is saved to theRecordings folder in the Gallery.OptionsAfter you have saved the recording to the Recordings folder, highlight therecording, and select Open to listen to the recording using the earpiece; or selectOptions > Delete, Rename, or Set as ring tone (a carrier-dependent feature).57FCC draft