S e t t i n g sTouch tones are sent during an active call. You can send them manually fromyour device keypad, or send them automatically by saving them in your device.Set typeIn the standby mode, select Menu > Settings > Phone > Touch tones > Manualtouch tones and one of the following options:Continuous—Used to set the tone sound for as long as you press and hold a key.Fixed—Used to send tones of the duration you specify in the Touch tone lengthoption.Off—Used to turn off tones. No tones are sent when you press a key.Set lengthYou can specify touch-tone length for the Fixed option. In the standby mode,select Menu > Settings > Phone > Touch tones > Touch tone length > Short(0.1 seconds) or Long (0.5 seconds).Start-up toneYou can select to have a start-up tone when you first turn on your device. In thestandby mode, select Menu > Settings > Phone > Start-up tone > On or Off.Power-down toneYou can select to have a power-down tone when you turn off your device. In thestandby mode, select Menu > Settings > Phone > Switch off tone > On or Off.Help text activationYour device displays brief descriptions for most menu items. When you arrive at afeature or menu, pause for about 14 seconds and wait for the help text to display.If necessary, use the scroll key to page through the full help text.The default setting for help text is On. However, you can turn help text on or off.In the standby mode, select Menu > Settings > Phone > Help text activation > Onor Off.■ Voice commandsBefore using voice tags, note the following:• Voice tags are not language-dependent, but depend on the speaker’s voice.• You must say the name exactly as you said it when you recorded it.68FCC draft