15[ 76 ]2 Press Select and scroll to a set of connection settings.For example: Set 1.3 Press Options and scroll to Edit.4 Scroll to each of the settings and enter information as shown below.Make all the required settings one by one. For appropriate settings,contact your network operator or service provider.• Homepage: Enter the homepage address of the WAP service you wantto use and press OK.• Connection type: Scroll to Continuous or Temporary and pressSelect.• Connection security: Scroll to On or Off and press Select.When the connection security is on, the phone tries to use a secureconnection with the WAP service. If a secure connection is notavailable, the connection will not be made. If you want to connectanyway with a non-secure connection, set the connection securityto Off.• Dial-up number: Enter the number and press OK.• IP address: Enter the address and press OK.• Authentication type: Scroll to Secure or Normal and press Select.• Data call type: Scroll to Analog or ISDN and press Select.• User name: Enter the user name and password and press OK.• Password: Enter your password and press OK.5 After you have made all the required settings, you can change theset’s name. Press and then Options, scroll to Rename, and pressSelect. Enter the name and press OK.Activate the settings1 Press Menu 11, scroll to Settings and press Select.Connection settings appears.2 Press Select and scroll to the appropriate set. For example: Set 1
