Copyright © 2003 Nokia. All rights reserved. 84Making a connection to a WAP service1. Activate the settings of the WAP service that you want to use:In the Services menu, select Settings and Connection settings. Scroll to thesetting set you want to use, press Options and select Activate.If you want to use the same WAP service as the previous time, you can skip thisstep.2. Make a connection to the WAP service in one of the following ways:• Open the homepage of the WAP service: In the Services menu, select Home.• Start the connection in standby mode: When you have not keyed in anycharacters on the display, press and hold .• Select the bookmark of the WAP service: In the Services menu, selectBookmarks, scroll to the desired bookmark, press Options and select Go to.If the bookmark does not work (Check service settings may be displayed),change the active set of connection settings and try again.• Enter the address of the WAP service: In the Services menu, select Go toaddress, key in the address (press for special characters) and press OK.Note that it is not necessary to add the prefix http:// in front of the addresssince it will be added automatically. If you are using a protocol other thanhttp, add the appropriate prefix.
