87Copyright © 2006 Nokia. All rights reserved.■ PTT settingsThere are two kinds of PTT settings: settings for connecting to the service and settings for use.You may receive the settings for connecting to the service from your service provider. See Configurationsettings service p. 14. You can enter the settings manually. See Configuration p. 64.To select the settings for connecting to the service, select Menu > Push to talk > Config. settings and from thefollowing options:Configuration — to select a service provider, Default, or Personal config. for PTT service. Only the configurationsthat support the PTT service are shown.Account — to select a PTT service account contained in the active configuration settingsYou can also select from the following options: PTT user name, Default nickname, PTT password, Domain, andServer addressTo edit the PTT settings for use, select Menu > Push to talk > PTT settings and from the following:1 to 1 calls > On — to select the phone to allow the reception of incoming one-to-one calls1 to 1 calls > Off — to make but not receive one-to-one calls. The service provider may offer some services thatoverride these settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone,select Notify.Listened groups > On — to activate the listened channelsPTT status in startup > Yes — to set the phone to automatically connect to the PTT service when you switch thephone onSend my PTT address > No — to hide your PTT address from channel and one-to-one calls