10 G e t s t a r t e d1. Open the memory card slot door (1).2. Place the memory card in the slotwith the gold-coloured area facingdown (2).3. Push the card gently to lock it intoplace. Close tight the slot door (3).Remove a memory cardImportant: Do not remove thememory card in the middle of an operation when the card is being accessed.Removing the card in the middle of an operation may damage the memory card aswell as the device, and data stored on the card may be corrupted.1. Press briefly the power key.2. Scroll to Remove memory card, and select OK > Yes.3. Open the memory card slot door.4. Push the card gently to release it.5. Pull the card out, and select OK.6. Close the slot door.■ Charge the battery1. Connect the charger to the wall socket.2. Connect the charger plug to the USB portin the device.If the battery is completely discharged, itmay take a few minutes before the chargingindicator appears on the display or beforeany calls can be made. The charging indicator blinks until it is possible to makecalls, and after that it is continuously on until the battery is fully charged.The charging time depends on the charger and the battery used.USB chargingYou can use USB charging when a wall socket is not available. With USB charging,you can also transfer data while charging the device. USB charging may be slowerthan charging through a wall socket. Charging may not work if you use a USB hub.USB hubs may be incompatible for charging a USB device.