47C a m e r a■ Capture imagesMain camera1. To activate the main camera, press the camera key. indicates still imagemode.2. To zoom in or out, press the volume keys.To make lighting and colour adjustments before capturing an image, selectfrom the active toolbar settings. See ‘Active toolbar,’ p. 47 and ‘Scenes,’ p. 49.3. To take a picture, press the camerakey.4. To close the main camera, selectOptions > Exit.Secondary camera1. To activate the secondary camera, press the camera key to activate the maincamera. Select Options > Use secondary camera.2. To zoom in or out, scroll up or down.3. To capture an image, press the scroll key.Active toolbarThe active toolbar provides you with shortcuts to different items and settingsbefore capturing an image or recording a video. Scroll to icons, and select them bypressing the scroll key.If you want the active toolbar to be visible before and after capturing an image orrecording a video, select Options > Show toolbar. To view the active toolbar onlyfor 5 seconds when pressing the scroll key, select Options > Hide toolbar.In the active toolbar, select from the following:Switch to video mode ( Switch to image mode) — to switch between thevideo and image modesScene modes — to select the sceneFlash mode — to select the flash mode (images only). To activate the red-eyereduction, select Red-eye. Avoid capturing image or zoom in very close to theobject. The red-eye reduction may not be shown until the image is saved in theGallery.Keep a safe distance when using the flash. Do not use the flash on people or animals at closerange. Do not cover the flash while taking a picture.