Nokia 6010 User Guide 47 Copyright © 2004 NokiaVoice featuresExisting voice commandAfter you have associated a voice tag to a command, you can either play back,change or delete the tag.PLAY BACK1 Select Menu > Extras > Voice commands > Audible alerts and the voicecommand tag you want to play back.2 Select Options > Playback.CHANGE1 Select Menu > Extras > Voice commands > Audible alerts and the voicecommand tag you want to change.2 Select Options > Change > Start, then speak the voice tag clearly into themicrophone.DELETE1 Select Menu > Extras > Voice commands > Audible alerts and the voicecommand tag you want to delete.2 Select Options > Delete > OK.• AUDIBLE ALERTSAudible alerts provide you with audible tones to indicate the current signal bar orbattery bar strength of your phone. In order to obtain audible alerts, the alerts mustfirst be set up as voice commands. To set up voice commands, see “Add a voice tag”on page 46.Select and hold Contacts and speak the voice tag clearly into the microphone.When the phone finds the tag, confirmation appears and the phone plays therecognized voice tag from the phone memory through the earpiece. The phonethen beeps to indicate how strong the battery or signal strength is. The followingtable shows what the number of beeps indicates.Audible Alert One Beep Two Beeps ThreeBeepsFour BeepsBattery BarStrengthLow Half full Almost full FullSignal BarStrengthWeak SomewhatstrongAlmoststrongStrong
