Nokia 6010 User Manual

Contents

Nokia 6010 User Manual Manual pdf 75 page image

64 Copyright © 2004 NokiaPIN code requestYou can activate the PIN code request to prevent unauthorized use of your phone.If you set the PIN code request to On, your phone will ask for the code each timeyou turn the phone on. When the phone is locked, calls still may be possible to theofficial emergency number programmed into your phone.ACTIVATE1 Select Menu > Settings > Security settings > PIN code request.2 Enter the PIN code supplied by your service provider and select OK > On > OK.DEACTIVATE1 Select Menu > Settings > Security settings > PIN code request.2 Enter the PIN code supplied by your service provider and select OK > Off > OK.ChangeYou can change your PIN or PIN2 code to any 4-digit to 8-digit number. You mustactivate the PIN code request first. See “PIN code request” on page 64.1 Select Menu > Settings > Security settings > Change access codes > ChangePIN code.2 Enter the current PIN code, select OK, enter the new PIN code, and select OK.3 Enter the new PIN code again to verify and select OK.Note: If you make a mistake while entering the code, Code Error appears.Start again at step 2 and be careful to enter the correct code. If you enter thewrong code three times in a row, the PIN code is blocked. To unblock the PINcode, you need a personal unblocking key (PUK) from your service provider.• PUK CODESThe PUK and PUK2 codes are 4-digit to 8-digit codes that usually come from yourservice provider along with the SIM card. The PUK code unblocks a blocked PINcode, and the PUK2 code unblocks a blocked PIN2 code.If you block your phone, contact your service provider. When you enter the PUKcode given by your service provider, the phone prompts you to enter and thenconfirm a new PIN code.• SECURITY CODEThe default security code is 12345. Nokia recommends that you change the defaultcode immediately.